-
2817 Aluminum Bottle Cap for beverage wine vodka whisky bottle
The aluminum bottle cap is simple in appearance and fine in production. Advanced printing technology can meet the effect of consistent color and exquisite pattern, which brings elegant visual feeling to consumers. In addition, aluminum cap also has good sealing, can meet the high temperature cooking sterilization and other special requirements. Therefore, the performance is superior and widely used.
Aluminum bottle caps are mostly processed in the production line with a high degree of automation, so the strength, elongation and size deviation of the material are very strict, otherwise it will produce cracks or creases during processing.
The general procedure is divided into the following steps：
Print the aluminum plate-The first stretch-The second and third stretch-side cut-At the top of the knurling-Plus the liner-Packing.For the video beverage category of the lid is best forgery proof.This can greatly ensure food safety.For the aluminum caps we should pay more attention to the technical parameters.Different raw material different cost,we mainly use 5052 3105 8011.
About the thickness of aluminum plate,usually we only use 0.19-0.25 mm aluminum plate.Of course,we select aluminum plate thickness according to customer’s detail requirement.If you want to learn more about bottle caps,you can follow our store.We will introduce other products next time, please look forward to it.
-
3035 3044 Aluminum Bottle Cap with PE liner high quality caps for wine rum vodka bottle
In recent years, aluminum bottle caps are more and more widely used in our daily life, especially in the packaging of wine, beverage and medical and health care products.
The aluminum bottle cap is simple in appearance and fine in production. Advanced printing technology can meet the effect of consistent color and exquisite pattern, which brings elegant visual feeling to consumers. In addition, aluminum cap also has good sealing, can meet the high temperature cooking sterilization and other special requirements. Therefore, the performance is superior and widely used.
Aluminum bottle caps are mostly processed in the production line with a high degree of automation, so the strength, elongation and size deviation of the material are very strict, otherwise it will produce cracks or creases during processing.
The general procedure is divided into the following steps：
Print the aluminum plate-The first stretch-The second and third stretch-side cut-At the top of the knurling-Plus the liner-Packing.For the video beverage category of the lid is best forgery proof.This can greatly ensure food safety.For the aluminum caps we should pay more attention to the technical parameters.Different raw material different cost,we mainly use 5052 3105 8011.
About the thickness of aluminum plate,usually we only use 0.19-0.25 mm aluminum plate.Of course,we select aluminum plate thickness according to customer’s detail requirement.If you want to learn more about bottle caps,you can follow our store.We will introduce other products next time, please look forward to it.
-
Different Size Mental Lug Lid
An introduction to the customization of canned fruit lids,In the screw cap surface coating, there will be no pattern blur or peeling. There is no anti-counterfeiting mark sprayed with anti-counterfeiting printed matter. Screw cap(https://www.ythongning.com/different-size-mental-lug-lid-product/) printing process design and production process control are relatively strict, there is no shoddy manufacturing, short of weight two phenomena.Spraying technology and spraying equipment are guided by personnel, and can be adjusted according to the actual situation. For the complete internal thread on the thread cover, its forming methods are mainly (1) the way of forced release, but the plastic parts are required to allow the structure, and the use of good elastic plastic. (2) The threaded core is made into an active insert and the mold is released manually outside the mold. Although the mold structure is simple, but the production efficiency is low, the labor intensity is high, can not be realized.
Canned fruit lid custom, screw cap inside to have sealant, so that in the use of the process can keep sealed. Do not tear the packing case when it is covered with sealant. There should be an anti-counterfeiting mark in the screw cover. Do not tear the packing bag when it is covered with sealant. The screw cap should have a sealant inside so that it can remain sealed during use. The product package should indicate the model number and size of the product. The anti-counterfeiting mark printed on the product must be consistent with the product manual. During the production process, the level in the production process will not change due to printing, and there is no difference in the level of screw cap printing and spraying. The anti-counterfeiting mark and anti-counterfeiting mark on the screw cover are anti-counterfeiting marks of different materials and different colors used in the production process. In the process of production, because there is a special sealing tape on the screw cap, so that it will be affected by thermal expansion and cold contraction in contact.
-
Pull ring crown cap for beer caps customized logo free samples
Although the beer bottle cap is only a very humble small lid, but it plays a very important role, with such functions as preservation, sealing, so, do you know how the beer bottle cap is produced?
The beer bottle cap is produced by the capping machine, which is composed of bottle turntable, capping head, capping slide, height adjustment device, hopper, blanking trough and so on. Beer bottle cap production process: cap feeding – positioning – cap pressing – reset .
The cap defines not only the diameter of the bottle neck, but also the shape of the edge of the cap and the material it is made of. The cap is required to be well sealed, which means more pleats; The cap also needs to be strong, which means there shouldn’t be too many pleats to ensure that each pleat has a larger surface area. However, the rusting problem in the production process of beer bottle cap is a big problem that troubles manufacturers. It can be done to prevent beer bottle cap rusting :
- Control the quality of bottle cap material plate
- In the beer production process to reduce the damage to the bottle cap rust layer.The punching cross section without anti-rust layer is caused by the limitations of the current inner cap processing technology, which is not a good solution for beer manufacturers.But according to customer requirements, in the plate after punching the cross section coated with rust layer, and then stamping forming
- In production, if the length exceeds the specified value, it is necessary to check the inner surface of the steel bowl. The surface of steel bowl can be used again after grinding.
Finally, we can collect the LIDS when we finish drinking the beer,
then turn them into a handmade craft!
-
Aluminium-Plastic Pull Ring Bottle Cap for beer glass bottle
Aluminum beer lids are made of aluminum，with good hygiene performance, will not rust, not open convenient, do not need auxiliary tools.It can prevent theft very well,According to the different needs of customers, the top of the lid can be engraved with different patterns, words, patterns and so on.There are two types of pull-back covers.
The pull-back can be pulled up to suck out or pour out liquid. The other is the big mouth style, in which almost the entire lid is uncovered when the pull ring is pulled up, to facilitate the removal of the food inside.
The tank body is formed directly by the drawing process, without leakage. The two cans do not need to be welded and sealed. The high-temperature sterilization resistance can ensure the product health, beautiful shape and good effect.
We understand that the full tear beer pull ring lids is widely used, the process is more perfect, the structure is beautiful and generous.However, the fully torn beer pull lid will be thrown away after opening, which will lead to air pollution and may hurt others, which is the disadvantage of fully torn.Of course, the prices of different types of pull ring covers are also different. Different patterns involve different techniques.It’s up to you to design what you want.
