cap

  • Different color and size capsule used for wine glass bottle with high quality capsules

    Different color and size capsule used for wine glass bottle with high quality capsules

    Capsule are divided into PVC capsule, tin capsule, aluminum capsule, aluminum plastic capsule, different capsule have different materials and different prices.What are the functions of wine capsule? Protective cork: Although the new world has already set off the spiral plug trend, but have to admit, in wine bottle stoppers, cork still accounted for a large proportion.  Wine sealed with cork will inevitably produce a certain gap, over time, wine is easy to be oxidized.  The wine capsule prot...
  • High quality twist off caps for honey glass jar with factory price jam glass bottle

    High quality twist off caps for honey glass jar with factory price jam glass bottle

    Regarding twist off caps, we can provide high twist off caps and short twist off caps and so on . According to the requirements of different customers, we can provide twist off caps with different designs, different sizes, and different raw materials. Twist off caps are usually used on glass bottles such as honey glass bottles, jam glass bottles, etc.Our one-stop shopping saves customers not only time but also money.

  • 2817 Aluminum Bottle Cap for beverage wine vodka whisky bottle

    2817 Aluminum Bottle Cap for beverage wine vodka whisky bottle

    The aluminum bottle cap is simple in appearance and fine in production. Advanced printing technology can meet the effect of consistent color and exquisite pattern, which brings elegant visual feeling to consumers. In addition, aluminum cap also has good sealing, can meet the high temperature cooking sterilization and other special requirements. Therefore, the performance is superior and widely used.

     Aluminum bottle caps are mostly processed in the production line with a high degree of automation, so the strength, elongation and size deviation of the material are very strict, otherwise it will produce cracks or creases during processing.

    The general procedure is divided into the following steps

    Print the aluminum plate-The first stretch-The second and third stretch-side cut-At the top of the knurling-Plus the liner-Packing.For the video beverage category of the lid is best forgery proof.This can greatly ensure food safety.For the aluminum caps we should pay more attention to the technical parameters.Different raw material different cost,we mainly use 5052 3105 8011.

    About the thickness of aluminum plate,usually we only use 0.19-0.25 mm aluminum plate.Of course,we select aluminum plate thickness according to customers detail requirement.If you want to learn more about bottle caps,you can follow our store.We will introduce other products next time, please look forward to it.

  • 3035 3044 Aluminum Bottle Cap with PE liner high quality caps for wine rum vodka bottle

    3035 3044 Aluminum Bottle Cap with PE liner high quality caps for wine rum vodka bottle

    In recent years, aluminum bottle caps are more and more widely used in our daily life, especially in the packaging of wine, beverage and medical and health care products.

    The aluminum bottle cap is simple in appearance and fine in production. Advanced printing technology can meet the effect of consistent color and exquisite pattern, which brings elegant visual feeling to consumers. In addition, aluminum cap also has good sealing, can meet the high temperature cooking sterilization and other special requirements. Therefore, the performance is superior and widely used.

    Aluminum bottle caps are mostly processed in the production line with a high degree of automation, so the strength, elongation and size deviation of the material are very strict, otherwise it will produce cracks or creases during processing.

    The general procedure is divided into the following steps

    Print the aluminum plate-The first stretch-The second and third stretch-side cut-At the top of the knurling-Plus the liner-Packing.For the video beverage category of the lid is best forgery proof.This can greatly ensure food safety.For the aluminum caps we should pay more attention to the technical parameters.Different raw material different cost,we mainly use 5052 3105 8011.

    About the thickness of aluminum plate,usually we only use 0.19-0.25 mm aluminum plate.Of course,we select aluminum plate thickness according to customers detail requirement.If you want to learn more about bottle caps,you can follow our store.We will introduce other products next time, please look forward to it.

  • Different Size Mental Lug Lid

    Different Size Mental Lug Lid

    An introduction to the customization of canned fruit lids,In the screw cap surface coating, there will be no pattern blur or peeling. There is no anti-counterfeiting mark sprayed with anti-counterfeiting printed matter. Screw cap(https://www.ythongning.com/different-size-mental-lug-lid-product/) printing process design and production process control are relatively strict, there is no shoddy manufacturing, short of weight two phenomena.Spraying technology and spraying equipment are guided by personnel, and can be adjusted according to the actual situation. For the complete internal thread on the thread cover, its forming methods are mainly (1) the way of forced release, but the plastic parts are required to allow the structure, and the use of good elastic plastic. (2) The threaded core is made into an active insert and the mold is released manually outside the mold. Although the mold structure is simple, but the production efficiency is low, the labor intensity is high, can not be realized.

     

     

    Canned fruit lid custom, screw cap inside to have sealant, so that in the use of the process can keep sealed. Do not tear the packing case when it is covered with sealant. There should be an anti-counterfeiting mark in the screw cover. Do not tear the packing bag when it is covered with sealant. The screw cap should have a sealant inside so that it can remain sealed during use. The product package should indicate the model number and size of the product. The anti-counterfeiting mark printed on the product must be consistent with the product manual. During the production process, the level in the production process will not change due to printing, and there is no difference in the level of screw cap printing and spraying. The anti-counterfeiting mark and anti-counterfeiting mark on the screw cover are anti-counterfeiting marks of different materials and different colors used in the production process. In the process of production, because there is a special sealing tape on the screw cap, so that it will be affected by thermal expansion and cold contraction in contact.

     

  • Pull ring crown cap for beer caps customized logo free samples

    Pull ring crown cap for beer caps customized logo free samples

    Although the beer bottle cap is only a very humble small lid, but it plays a very important role, with such functions as preservation, sealing, so, do you know how the beer bottle cap is produced? 

     

     

     

    The beer bottle cap is produced by the capping machine, which is composed of bottle turntable, capping head, capping slide, height adjustment device, hopper, blanking trough and so on.  Beer bottle cap production process: cap feeding – positioning – cap pressing – reset .

    The cap defines not only the diameter of the bottle neck, but also the shape of the edge of the cap and the material it is made of.  The cap is required to be well sealed, which means more pleats;  The cap also needs to be strong, which means there shouldn’t be too many pleats to ensure that each pleat has a larger surface area. However, the rusting problem in the production process of beer bottle cap is a big problem that troubles manufacturers. It can be done to prevent beer bottle cap rusting :

    1. Control the quality of bottle cap material plate
    2. In the beer production process to reduce the damage to the bottle cap rust layer.The punching cross section without anti-rust layer is caused by the limitations of the current inner cap processing technology, which is not a good solution for beer manufacturers.But according to customer requirements, in the plate after punching the cross section coated with rust layer, and then stamping forming 
    3. In production, if the length exceeds the specified value, it is necessary to check the inner surface of the steel bowl.  The surface of steel bowl can be used again after grinding. 

    Finally, we can collect the LIDS when we finish drinking the beer,

    then turn them into a handmade craft!

     

  • Nature cork design logo free samples high quality corks

    Nature cork design logo free samples high quality corks

    Generally, we all know that the stopper of wine is called cork, although occasionally there are red wines with screw cap, rubber stopper, glass stopper and other stoppers, but it does not prevent the dominance of cork.

    But is cork made of oak? The answer is not that oak is hard and not suitable for corks, but it is a great material for making oak barrels. And what we usually call cork is made from the bark of the cork oak.

    This type of oak skin produces corks of the right tightness and best quality. Cork sealing the bottle is not to make the whole bottle airtight, wine is a living wine, need to breathe, if airtight, the wine is impossible to mature, into a bottle of dead wine. So the cork has a tremendous effect on the quality of the wine.

    In order to ensure the quality of the cork, softwood TREES ARE HARVESTED EVERY nine years. The bark of cork trees can regenerate, but summers in the Mediterranean are so hot that workers often leave part of the bark behind to protect the cork trees.

    In general, it is best to place the bark on concrete after harvesting and allow it to air dry, while also avoiding contamination. After that, the cork is selected and the boards that are completely unusable are removed. Compared to the image on the right, the cork on the left is too thin to make high-quality natural corks, but it can still be used to make technical stoppers.

     

    After the cork is made, the machine will automatically send it to the corresponding grade container. Then, the worker will screen and sort the cork again to ensure its quality. Therefore, the best corks are left after screening, and the price is certainly not cheap. The cork will be made according to the requirements of different customers, in the cork above the engraved with different alphabet patterns, and finally become the oak cork we usually use.

  • Nature cork high quality free samples corks for wine vodka whisky glass bottle

    Nature cork high quality free samples corks for wine vodka whisky glass bottle

    Known as the patron saint of wine, corks have long been considered ideal wine stoppers because they are flexible and seal the bottle well without completely trapping air, allowing the wine to develop and mature slowly. Do you know how corks are actually made?

    Cork https://www.ythongning.com/nature-cork-2-product/is made from the bark of cork oak. Cork oak is a deciduous tree of the quercus family. It is a slow-growing, evergreen oak found in some parts of the western Mediterranean. Cork oak has two layers of bark, the inner bark has vitality, and the outer bark can be removed without affecting the survival of the tree. Cork oak outer bark can provide a soft protective layer for trees, it is also a natural insulating layer, can protect trees from fire; The inner bark is the basis for the new outer bark that is born each year. Oak cork age reaches 25 years, can carry out the first harvest. But the first harvest of oak bark is too irregular in density and size to be used as a cork for wine bottles, and is usually used as a floor or good insulation. Nine years later, the second harvest can be made. But the harvest was still not of the quality required to make corks, and could only be used for accessory products such as shoes, accessories and household items. By the third harvest, the cork oak is more than forty years old, and the bark from this harvest is ready to be used to make corks. Thereafter, every 9 years cork oak will naturally form a layer of bark. Typically, the cork oak has a life span of 170-200 years and can produce 13-18 useful harvests during its lifetime.

    After the cork is made, it needs to be washed. Some customers have requirements on color, so some bleaching will be carried out during the washing process. After washing, workers will screen the finished corks and pick out the products with surface defects such as fine edges or cracks. High quality corks have a smooth surface and few fine pores. Finally, the manufacturer will be based on the requirements of the customer on the cork printing, do the final treatment. Printed information includes the origin of the wine, the region, the name of the winery, the year the grapes were picked, bottling information or the year the winery was founded. However, some cork manufacturers ship the finished product to branches in different countries to be printed by specific customers. Mimeograph or fire printing technology is usually used in the printing of jet characters. Mimeographing is cheaper and the ink will seep into the stopper and come off easily. Fire printing technology costs more, but the printing quality is good. Once the printing is done, the cork is ready to seal the bottle.

  • Wine Bottle Wooden Cork T shape Customized logo corks high quality

    Wine Bottle Wooden Cork T shape Customized logo corks high quality

    The Cork, or corkoak, is a soft, elastic wood with many holes in it that make it softer when soaked in water. Seventy percent of the cork is made into a wine stopper. This kind of wood is made after cutting the cork(https://www.ythongning.com/nature-cork-2-product/), again through the machine will the stopper compaction and into the bottle, and advantage of the characteristics of the elastic expansion to return to original state, thus tightly sealed the bottleneck, so as to protect the wine in the bottle does not damage of leakage. The cork has many tiny holes in the inside, which allow the wine inside to breathe and develop (very little air enters, and the wine ripeness is through the gap between the cork and the bottle, not through the inside of the cork), thus making the wine the best.

    How do so many corks continue to be produced?

    Cork grows in countries with Mediterranean climates, such as Spain, Portugal, Morocco, Italy, Tunisia, France, etc. It doesn’t need irrigation, it doesn’t need pruning, it doesn’t need extra fertilizer. Portugal is the largest cork producer, and cork harvesting is regulated by the government. You can’t harvest it until it’s 25 years old, but when you first harvest it’s not very good, so you can only use it to make soles and stuff, not stoppers. When the tree is 42 years old, it can be harvested as a stopper, harvested every nine years and still alive for another 170 years or more. The harvest is done by skilled workers with good wages who use small axes to slowly chip away at the bark of the tree, which does little damage to the tree.

     

    Eventually corks began to be graded according to quality, generally based on the number of holes. White corks are usually highly valued, although some vintners prefer a darker or natural color. Women usually use a quick thinking eye to pick out the best and most attractive of the seven levels of cork. In recent years, more than three classification standards have been added, in which the vast majority of manufacturing processes are done by machines. The human eye is the key to quality, and it is this grade of cork that ends up in the container for bottling.

  • Aluminium-Plastic Pull Ring Bottle Cap for beer glass bottle

    Aluminium-Plastic Pull Ring Bottle Cap for beer glass bottle

    Aluminum beer lids are made of aluminumwith good hygiene performance, will not rust, not open convenient, do not need auxiliary tools.It can prevent theft very well,According to the different needs of customers, the top of the lid can be engraved with different patterns, words, patterns and so on.There are two types of pull-back covers. 

    The pull-back can be pulled up to suck out or pour out liquid. The other is the big mouth style, in which almost the entire lid is uncovered when the pull ring is pulled up, to facilitate the removal of the food inside.

     

    The tank body is formed directly by the drawing process, without leakage. The two cans do not need to be welded and sealed. The high-temperature sterilization resistance can ensure the product health, beautiful shape and good effect.

    We understand that the full tear beer pull ring lids is widely used, the process is more perfect, the structure is beautiful and generous.However, the fully torn beer pull lid will be thrown away after opening, which will lead to air pollution and may hurt others, which is the disadvantage of fully torn.Of course, the prices of different types of pull ring covers are also different. Different patterns involve different techniques.It’s up to you to design what you want.

  • synthetic Cork high quality corks for wine whisky vodka glass bottle

    synthetic Cork high quality corks for wine whisky vodka glass bottle

    Polymer stopper is a stopper made of polyethylene foam. According to the production process, it can be divided into many kinds: joint extrusion stopper, separate extrusion stopper, molded foam stopper, and so on.

    To taste a bottle of red wine, the natural thing to do is to uncork it.

    When it comes to corks, most people have an image of sealing and protecting wine.But there are many different kinds of wine, so to “protect” these different qualities of wine, also need different materials, different kinds of stoppers.

    After being made, some wines are aged in oak barrels for a period of time, and the rest of their lives are spent in the bottle until they are opened.How a wine is presented in terms of aroma and taste is largely related to the choice of cork. Today red wine network for you to introduce eight common red wine stopper - polymer bottle stopper.

    Polymer bottle stopper is a bottle stopper made of polyethylene foam.It currently accounts for 22% of the bottled wine market.The advantage of polymer stoppers is that they eliminate cork flavor and breakage problems, and their product consistency is quite high, which can ensure that the whole batch of wine is in a roughly the same aging stage.At the same time, the technology of producing polymer stoppers continues to develop.

    Through the control of oxygen permeability, the stoppers with different oxygen permeability rates can be produced to meet the needs of different wine varieties, so that winemakers can have the opportunity to understand and control the aging of bottles during storage.

     

  • Natural Cork

    Natural Cork

    Polymer stopper is a stopper made of polyethylene foam. According to the production process, it can be divided into many kinds: joint extrusion stopper, separate extrusion stopper, molded foam stopper, and so on.

    To taste a bottle of red wine, the natural thing to do is to uncork it.

    When it comes to corks, most people have an image of sealing and protecting wine.But there are many different kinds of wine, so to “protect” these different qualities of wine, also need different materials, different kinds of stoppers.

    After being made, some wines are aged in oak barrels for a period of time, and the rest of their lives are spent in the bottle until they are opened.How a wine is presented in terms of aroma and taste is largely related to the choice of cork. Today red wine network for you to introduce eight common red wine stopper - polymer bottle stopper.

    Polymer bottle stopper is a bottle stopper made of polyethylene foam.It currently accounts for 22% of the bottled wine market.The advantage of polymer stoppers is that they eliminate cork flavor and breakage problems, and their product consistency is quite high, which can ensure that the whole batch of wine is in a roughly the same aging stage.At the same time, the technology of producing polymer stoppers continues to develop.

    Through the control of oxygen permeability, the stoppers with different oxygen permeability rates can be produced to meet the needs of different wine varieties, so that winemakers can have the opportunity to understand and control the aging of bottles during storage.

12 Next > >> Page 1 / 2