Different Size Mental Lug Lid

Short Description:

An introduction to the customization of canned fruit lids,In the screw cap surface coating, there will be no pattern blur or peeling. There is no anti-counterfeiting mark sprayed with anti-counterfeiting printed matter. Screw cap(https://www.ythongning.com/different-size-mental-lug-lid-product/) printing process design and production process control are relatively strict, there is no shoddy manufacturing, short of weight two phenomena.Spraying technology and spraying equipment are guided by personnel, and can be adjusted according to the actual situation. For the complete internal thread on the thread cover, its forming methods are mainly (1) the way of forced release, but the plastic parts are required to allow the structure, and the use of good elastic plastic. (2) The threaded core is made into an active insert and the mold is released manually outside the mold. Although the mold structure is simple, but the production efficiency is low, the labor intensity is high, can not be realized.

Canned fruit lid custom, screw cap inside to have sealant, so that in the use of the process can keep sealed. Do not tear the packing case when it is covered with sealant. There should be an anti-counterfeiting mark in the screw cover. Do not tear the packing bag when it is covered with sealant. The screw cap should have a sealant inside so that it can remain sealed during use. The product package should indicate the model number and size of the product. The anti-counterfeiting mark printed on the product must be consistent with the product manual. During the production process, the level in the production process will not change due to printing, and there is no difference in the level of screw cap printing and spraying. The anti-counterfeiting mark and anti-counterfeiting mark on the screw cover are anti-counterfeiting marks of different materials and different colors used in the production process. In the process of production, because there is a special sealing tape on the screw cap, so that it will be affected by thermal expansion and cold contraction in contact.